DEYUE 3 Set Standard Jumper Wires Plus 3 Set of Solderless Prototype Breadboard 830 tie Points Breadboard | 3 Set of M/F, M/M, F/F – Each 40pin Electronic Jumpers Wire

Jumper wires:

★ High Quality set of jumpers with the sturdy metal pins and do not easily bend when plugged into the breadboard

★ Quality certified; The ends Do not break after several usages and bending

★ The flexibility of having choices of female to female, female to male and male to male jumper wire and flowless snapping of female header male ends

Breadboards:

★ The quality of connections is supper consistent.

★ The contacts are perfectly aligning with the holes; NO power fluctuation across the boards;

★ Wonderful selection of the breadboards which fit to various electronic DIY projects and electrical experiments, including Arduino

★ Quality certified; Fit for 21-32 AWG (0.2 – 0.7MM) wire

Components Features:

3 Set of Jumper Wires

Multiple jumpers can be connected next to one another on a 0.1″ header. Each group of jumpers are connected to each other and can either be pulled apart in any quantity or kept whole based on your needs.

Color: 10 options as shown in the pictures. 
Material: high-grade copper core (each color has 12 roots)
Each cable length: 21cm / 8.27 inch
The male ends meant for insertion into standard 0.1 Inch (2.54mm) female sockets and vice versa.

3 pcs 830 tie-points breadboard (Full-Size)

200 tie-point in 2 power rails, 630 in a matrix of 10 x 63. White ABS plastic, with black legend. Colored power rails with 2 split power buses. All pins are spaced by a standard 0.1 Inch. Perfect for straddling a DIP package over.

The boards also have interlocking parts, so you can hook as many together as you’d like.

It can be used for fast prototyping of electrical and electronic circuits without any soldering.

Make sure this fits by entering your model number.
100 % SATISFACTION GUARANTED ★ Make YOUR bread boarding easy with the great end terminals to stick into the consistent holes alignment breadboard points with different color for convenience and variety of lengths to support your needs
NO WORRIES ABOUT ANY WIRE FAILIER ★ With firm plastic hosing on the terminal ends and 10 woven copper cables as one, YOU should never be worried about any frailer to be debugged PIN HOLES ARE EXQUISITELY LINING UP ;
PERFECT MATCH OF FEMALE MALE CONNECTORES ★ With the high friction to hold the male ends tightly; Adequate pin ends length; They fit excellently into the breadboard.
TIME SAVING KIT OF JUMPER WIRES AND BREADBOAR ★ DIY with Arduino based; Raspberry Pi 2, 3; Many different sizes; No twist or deformation on the U-Shape Jumpers; With subdivided case, Without any intermittent connections; Holes are properly cut out;
ACKAGE COMPONENT ★ 3 X 830 tie-points (6.5 x 2.2 x 0.4″ ); 3 x 40pin breadboard jumper wires in one set F2F, F2M, M2M pin, for your prototyping pleasure